Видео

These are amazing... I use them solely for recording classical and jazz guitars with good microphones like Neumann or the like (soundhole or cabinet, respectively); anything more would be a waste of money. I can't approach their limitations with what I am doing! I appreciate the scientific review.

IM ON THE TRIAL IT WONT CAPTURE AUDIO

Make sure that you do your due diligence on the Systemwide software and ASIO mode in a Windows environment. After days of toubleshooting with tech support from Sonarworks, I ended up sending this product back because it doesn't function as advertised. From the Sonarworks tech: " ASIO mode or Wasapi mode in Systemwide doesn't change its relationship with DAW - you will still need to run DAW (or any other advanced audio software) in Wasapi or DirectSound to be able to use Systemwide as DAW output." This was a non=starter form me as WASAPI or Directsound add in far too much system latency. My workflow involves moving quickly between Ableton, P-Tools, and Izotope software, while also referencing online sources such as Spotify and Splice. I was hoping to be able to use Systemwide to set EQ adjustments across my entire system, and that is not possible without WASAPI or DS mode.

I'm a budding studio guy

Would be great to see more frequencies steps on the frequency graph. 100hz, 1 kHz and 10 kHz are not sufficient

Using a mic can change the quality of sound ?

- Does not like breathing - cannot edit the result to clean and to cut and paste - limitation of 5 minutes its a pity because you can use it to add nice choir and you have a lot of choice in voices You get better result with Synthesier V

DRIVING ME NUTS, CAPTURE DOES NOT WORK! HORRIBLE INSTRUCTIONS

Hello, I am appreciating the software and experience of sounding out my room. I already found some areas I've improved simply by adjusting speakers placement and settings, the standalone desktop app works great on all my audio (which is routed thru the DAW). I have loaded the app for mixing in the DAW and it appears in the browser. BUT. When I add it to main output and try to open it, it opens a window that asked for my credentials. Which I type in. I've done it 5 or ten times and get the same message. "FAILURE TO ACTIVATE" Can you please help? I starting to mix my 3rd album! Yeehaw.

Insanely good review

This is a cool product but the demo includes other features that you will still need to buy. This is not communicated so you may think this demo is the "full version" when you buy but you still need to buy the $50 target on top of the base tool. This is very deceptive and looking into a class action so ping me since as consumers we need to vote with our pocketbook.

Hello, is it possible to add a sound inside this program and my musical instruments and copy other sounds to it? Thank you.

it doesnt work

Still far too many weird artefacts to actually be of use, unless of course you WANT to sound like a robot that's been badly recorded and then the recording is badly transcoded to an 8 bit mp3 🤣😂🤣And they want money... for that?????

Gave this a go today with no success. The vocal I recorded could be heard fine in the daw but after processing the software just produces hiss? What did I do wrong? Also, is it not possible to import a vocal? Does it have to be recorded there and then? Thanks

Is this software similar to Breakaway Audio Enhancer? I've been using that one for decades and I have no complaints so far, I never used anything else because that one works for my needs and if it works I don't usually change anything. But I still want to know if there are similar programs like Breakaway Audio Enhancer because I may try different programs someday, is SoundID Reference one of them? or is it different compared to Breakaway Audio Enhancer?

You a link for info on a 2.1 setup with sub and x2 tops configuration but i can't see the link. Can you advise please?

I have twin x and I bought the multichannel version of soundid. but when I tried to test it I found that my MONLR can sound normally, LFE can't, and LINE's 3/4 can't actively sound. It's not like it can sound at the same time like it usually does with BASS management. How do I fix this please, I noticed you were smooth when testing the interface.

Tried the demo today. I am absolutely blown away.

Your nails do not correspond to your voice lol

Saxophone and Trombone suck. Is it supposed to suck?

i own the full sonarworks sound id reference for headphones and speakers, i have apollo solo with uad console.... i also bought apollo x addon today and have it activated on sonarworks website... however its not showing me as plugin in console...... AND YES ITS ALL UPDATED because i installed ALL OF IT today on my new mac but its not showing.....

Can’t believe how bad your website is

does this work live like in my daw as I am recording can I use someone elses voice and record live directly or is it after i recorded my track then i have to apply the plugin.

I think its pretty safe to assume that this is using zero latency filters. Is there a basic crossfeed option for headphones without paying for yet another addon?

Is it ironic that the voice sounds different from each other in sections of this video?

this things been analyzing a 2 minute clip for close to half an hour now, is it supposed to be that slow?

Yall should link with Eleven Labs!!

I believe you should develop a premium microphone that eliminates the need for manual calibration by walking it around your 7.4.1 Studio. I’m genuinely curious about the technical challenges involved in creating a software and microphone combination that functions seamlessly like the Trinnov audio system, a significant competitor. A simple Google search reveals that this product is quite expensive. However, I believe there’s a middle ground that could be achieved. Trinnov seems unwilling to reduce prices or develop a system that expands the Nova. Nevertheless, I think it would be beneficial to leverage the power of the UAD processor. It appears that UAD might be exploring the possibility of developing a new processor for the future. In my opinion, this combination of a room correction software microphone is the only worthwhile investment for anyone.

Hi, I am currently confused between buying the SoundID for my project studio. Would you guys be introducing features like fix phase response of the speakers or releasing some hardware unit box for realtime processing in future. If that would be something I would buy the SoundID asap.

Dialogue too?

Could you tell me what I have to do, I want to install SoundID voice Al, but when I install the system says you can't do this. Maybe its something wrong with link? Maybe programme Has a mistake?

Is this actually going to be an in-line EQ when MONITORING INPUTS? I have to put on headphones (which also need to be corrected) when tracking my guitar because I cant apply a corrective Room EQ to the monitoring inputs.

Whenever I try to use the plugin in Nuendo 10.3 it says a serious problem has occurred and it won't load. It used to work the the older version.

i see a lot of people complaining about the price majority company's charge for upgrades they have to make money somehow

I am the only one that sounds a little bit different from the original "not integrated" Sound ID ref? When I disable the original program and enable the UAD monitor correction sounds like a little bit harsh on the very hi-end (around 12-15 Khz). On the other hand it sounds with a better dynamic range... (my perception). It´s not something raw... a subtle thing, but I can feel it.

Disappointed Apollo 8 user here. I'm not purchasing a new X soundcard for this to work. Could have just added a plugin to the uad universe. Then everyone could have inserted it on their virtual outs just like you would do in your daw. But I'm no expert at software programming. Maybe that wouldn't have been possible...I was really looking forward to a streamlined version of soundID. It's a very useful tool. Please make it happen for us non X users.

After I bought this add-on, I realized that it was not compatible with Apollo Solo. Please be careful. That's a very tough problem I have to buy Twin for this.

Snake oil

Not working. I don't see the 'Apply profile to Apollo X' button

I'm so disappointed in this.. I have 2 sets of monitors and I'm not even able to switch between them in sonarworks within console. "Monitor correction is unavailable when ALT monitoring is active". Will this feature be available in the near future, or not?

Why does the ad say only rack units can have two headphone profiles? I mean, X4 also has two headphone jacks -- are you seriously telling me it only allows for a single profile???

Why would I pay extra for this function when I've already paid for Sonarworks and UA Apollo? NOPE! I'll just keep running it as a plugin in my DAW where it does the same thing with no extra costs.

just bought the upgrade but i dont have the option to transfer the speaker or headphone profile to the apollo

No linear phase

I can tell you we don’t depend on this

What’s the point of the free trial of the software, don’t you need the microphone?

Antílope interfaces please 🙏🙏🙏

Everything should be for free these days it seems.

I have sonarworks 4 (not soundID), so I do have profiles ready. Are these profiles loadable with UAD soundID, or do I need to buy the standalone soundID too to apply the profile?